18-Kanal 8-Bit-PWM-LED-Treiber mit I2C-Schnittstelle

PIMORONI LTD - This is a super low-cost way to drive 18 leds at constant current up to 34mA per channel- no resistors required! Just hook up the cathodes of your LEDs to each channel and provide a common 5V supply for the anodes and away you go! 2. 75 - 5. 5v supply and logic voltage up to 34ma per channel constant current sinking adjustable Bread-board compatible format I2C interface address 0x54 Supplied with 0

1" headers to solder yourself the i2c interface is very simple to use and works with Raspberry Pi, Arduino, and many other platforms - the device address is 0x54. You can pick your own leds and layout to suit your project, and then use the PiGlow library and existing examples to get you started. With the raspberry pi you can use the 3v3 supply to power the chip via the VCC pin on the breakout board and the 5V supply to power the LEDs.

18-Kanal 8-Bit-PWM-LED-Treiber mit I2C-Schnittstelle - We love the little sn3218a chip we used to make PiGlow so much that we've decided to turn it into a handy little breakout module. We have an arduino library available here: https://github. Com/pimoroni/pimoroni_arduino_sn3218 And a Python one for the Raspberry Pi, too: https://github. Com/pimoroni/sn3218 dies ist eine sehr geringe-kostengünstige Art, 18 LEDs an Konstantstrom bis 34mA pro Kanal zu steuern.

Brot-board für format. Bis zu 34ma pro Kanal verstellbar Konstantstrom sinkend.

Weitere Informationen über PIMORONI LTD

SunFounder PCA9685 16 Channel 12 Bit PWM Servo Driver for Arduino and Raspberry Pi

SunFounder miniLCD - Component list - 1 * pca9685 16-channel 12-bit pWM Servo Driver Contain an i2c-controlled pwm driver with a built-in clock. Introduction pca9685 16-channel 12-bit pwm servo driver can help a lot when there are insufficient PWM output pins for the MCU in your project. 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate.

It means, unlike the tlc5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running! Support using only two pins to control 16 free-running PWM outputs - you can even chain up 62 breakouts to control up to 992 PWM outputs. 3 pin connectors in groups of 4, so you can plug in 16 servos at one time Servo plugs are slightly wider than 0

SunFounder PCA9685 16 Channel 12 Bit PWM Servo Driver for Arduino and Raspberry Pi - 1" so you can only stack 4 next to each other on 01" header. 5v compliant, which means you can control it from a 3. 3v microcontroller and still safely drive up to 6V outputs this is good when you want to control white or blue LEDs with 3. 4+ forward voltages. The only condition is that the main control chip supports I2C communication, which means enabling the communication between the chip and PCA9685, so as to control multiple servos simultaneously.

Weitere Informationen über SunFounder miniLCD


Ähnliche Produkte


Aukru 3er Set Alu Kühlkörper in verschiedenen Größen für Raspberry Pi 3 Model B Raspberry pi 2 Model B zum Aufkleben

Aukru 520361290242 - Aukru 3er set alu kühlkörper in verschiedenen größen für raspberry pi 3/ 2 model b/ modell b + das kühlkörper set eignet sich besonders für Daueranwendungen und Übertaktung, da die Abwärme optimal über die Aluminium Kühlrippen entweichen kann Achtung : der Boden des Raspberry pi 2 model B ist 1G SDRAM Speicher-Teilchen, damit keiner Kühlkörper auf dem Boden des Model benötigt.

Support using only two pins to control 16 free-running PWM outputs - you can even chain up 62 breakouts to control up to 992 PWM outputs. Achtung : der boden des raspberry pi 2 model b ist 1G SDRAM Speicher-Teilchen, damit keiner Kühlkörper auf dem Boden des Model benötigt. Der zweite kleine kühlkörper ist nur ein Präsent Contain an i2c-controlled pwm driver with a built-in clock.

Aukru 3er Set Alu Kühlkörper in verschiedenen Größen für Raspberry Pi 3 Model B Raspberry pi 2 Model B zum Aufkleben - It means, unlike the tlc5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running! Perfekt für 24-Stunden-Betrieb oder Übertaktungen. 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate. 3 pin connectors in groups of 4, so you can plug in 16 servos at one time Servo plugs are slightly wider than 0

1" so you can only stack 4 next to each other on 01" header. Dieses kühlset verbessert die Leistung und Lebensdauer ihres Raspberry nicht nur im normalen gebrauch !!

Weitere Informationen über Aukru 520361290242


Ähnliche Produkte


Eastlion 100x 5mm Round Head Gemeinsame Kathode RGB-LED Emitting Diodes

Eastlion - 4pin RGB. Diese hochwertigen high-brightness-leds sind perfekt f¨¹r den Job und die genauen Werte, DJ-Equipment, die wir in all unseren Modifikationen. Brandneu und hochwertig. Gewicht: 22g; das wei?e, runde kopf emittierende dioden, anzeigen, gr¨¹ne und rote Licht, gemeinsame Kathode Art emittieren Ideal f¨¹r Farb-Displays, k?nnen blaue, mit 4-Pin-Anschl¨¹ssen, Diagnose-oder Analyseausr¨¹stung und etc.

5v compliant, which means you can control it from a 3. 3v microcontroller and still safely drive up to 6V outputs this is good when you want to control white or blue LEDs with 3. 4+ forward voltages. It means, unlike the tlc5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running!

Eastlion 100x 5mm Round Head Gemeinsame Kathode RGB-LED Emitting Diodes - 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate. 3 pin connectors in groups of 4, so you can plug in 16 servos at one time Servo plugs are slightly wider than 01" so you can only stack 4 next to each other on 01" header. Support using only two pins to control 16 free-running PWM outputs - you can even chain up 62 breakouts to control up to 992 PWM outputs.

Energieeffizient. Wellenl?nge: 460-470 nm auf.

Weitere Informationen über Eastlion


Ähnliche Produkte


IIC/I2C/TWI/SP​​I Serial Interface Board Module Für Arduino 1602LCD

GAOHOU A1233 - Beschreibung: this is another great IIC/I2C/TWI/SPI Serial Interface. This is another great iic/i2c/twi/spi serial interface. As the pin resources of arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this i2c interface module, you will be able to realize data display via only 2 wires.

It means, unlike the tlc5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running! Betrachtungswinkel: 20 ~ 25 Grad. Perfekt f¨¹r konsole und ger?te modifikationen ¨¹blicherweise in der fahrzeug-Display-Beleuchtung, Handys und viele andere Produkte.

Achtung : der boden des raspberry pi 2 model b ist 1G SDRAM Speicher-Teilchen, damit keiner Kühlkörper auf dem Boden des Model benötigt. Max kontinuierliche vorw?rtsstrom: 20mA. Wellenl?nge: 460-470 nm auf. 3 pin connectors in groups of 4, so you can plug in 16 servos at one time Servo plugs are slightly wider than 0

IIC/I2C/TWI/SP​​I Serial Interface Board Module Für Arduino 1602LCD - 1" so you can only stack 4 next to each other on 01" header. I2c address: 0x20~0x27 the original address is 0x20, you can change it yourself supply voltage: 5v the backlight and contrast is adjusted by potentiometer Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable Compatible for 1602 LCD 2004 LCD Lieferumfang: 1 x IIC I2C Adapter Serial Interface Board Module Contain an i2c-controlled pwm driver with a built-in clock.

Weitere Informationen über GAOHOU A1233


Ähnliche Produkte


Raspberry Pi V2.1, 8 MP 1080P Kamera-Modul

Raspberry Pi RPI-CAM-V2 - Diese hochwertigen high-brightness-leds sind perfekt f¨¹r den Job und die genauen Werte, DJ-Equipment, die wir in all unseren Modifikationen. Brandneu und hochwertig. 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate. 3 kühlkörper: 1 große + 2 kleine. Come with 2 iic interface, which can be connected by Dupont Line or IIC dedicated cable.

Support using only two pins to control 16 free-running PWM outputs - you can even chain up 62 breakouts to control up to 992 PWM outputs. The backlight and contrast is adjusted by potentiometer. If you already has i2c devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.

Raspberry Pi V2.1, 8 MP 1080P Kamera-Modul - I2c address: 0x20~0x27 the original address is 0X20, you can change it yourself Supply voltage: 5V. 5v compliant, which means you can control it from a 3. 3v microcontroller and still safely drive up to 6V outputs this is good when you want to control white or blue LEDs with 3. 4+ forward voltages. Fixfokus Objektiv.

Perfekt für 24-Stunden-Betrieb oder Übertaktungen.

Weitere Informationen über Raspberry Pi RPI-CAM-V2


Ähnliche Produkte


Banana Pro Gehäuse inkl. 2.5" HD Gehäuse acryl/transparent

Lemaker - Betrachtungswinkel: 20 ~ 25 Grad. Perfekt f¨¹r konsole und ger?te modifikationen ¨¹blicherweise in der fahrzeug-Display-Beleuchtung, Handys und viele andere Produkte. It means, unlike the tlc5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running!

Geeignet für raspberry pi 3 model b/ pi 2 model b, nur müssen zwei Kühlkörper, Der zweite kleine Kühlkörper ist nur ein Präsent. This is another great iic/i2c/twi/spi serial interface. 8 megapixel sony imx219 Image Sensor. 3 kühlkörper: 1 große + 2 kleine. 4pin RGB. 3 pin connectors in groups of 4, so you can plug in 16 servos at one time Servo plugs are slightly wider than 0

Banana Pro Gehäuse inkl. 2.5" HD Gehäuse acryl/transparent - 1" so you can only stack 4 next to each other on 01" header. The backlight and contrast is adjusted by potentiometer. 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate. Dieses kühlset verbessert die Leistung und Lebensdauer ihres Raspberry nicht nur im normalen gebrauch !!

Support using only two pins to control 16 free-running PWM outputs - you can even chain up 62 breakouts to control up to 992 PWM outputs. Come with 2 iic interface, which can be connected by Dupont Line or IIC dedicated cable.

Weitere Informationen über Lemaker


Ähnliche Produkte